Hawker-Electronics

Hawker-Electronics

Conductivity

This ranges from the E12 heavy duty single holder manufactured in alkaline resistant phenolic for sewage applications with the facility to adjust the electrode internally +/- 350mm to allow for summer and winter variances of level,to the small E14 multiholder in polypropylene suitable for bund leakage detection, dry wells and header tanks.

View More

Indication & Control

The requirement to accurately monitor hydrogen when electrolysing brine (NaCl) to produce chlorine and sodium hydroxide is crucial process safety and efficieny. Not only does the KK650 monitor hydrogen but also chlorine purity. The KK650 hydrogen in chlorine analyser is based onour own in-house thermal conductivity expertise.

View More

Ultrasonic

These accurate and reliable sensors are designed for the most difficult fluids to monitor, where contact with media is not desirable. This can happen at extremes of sensing – ultrapure on one extreme, and dirty on the other, as well as in environments where coating or scaling is possible.

View More

Tankscan

The Hawker Tankscan tank level measuring system comprises of the FC1 level controller mounted within a weatherproof enclosure, and the FP series level transducer for top tank entry. (side entry and bottom entry versions available on request).
The transducer operates on proven and reliable magnet and reed switch principle providing a continuous reading of level.
The controller incorporates a large easily readable analogue meter displaying the tank level.

View More

Capacitance

The FCP capacitance probes can be used on oil or water applications. The probes are manufactured to the required length and on site installation is simple with only one parameter to set namely the span. For water applications a concentric probe with the inner sensor insulated is required. For oil applications a concentric probe with bare inner and outer sensors is required.
A wide range of suitable controllers for use with the FCP Probes are available from the Indication & Control section.

View More

Hydrostatic

Bubbler Hydrostatic Level Measurement System for aggressive liquids where fumes or chemicals will affect the sensor. As only air is bubbled into the liquid then the dip pipe is constantly being cleaned making it a low maintenance system. A pressure sensor measures the back pressure acting on the air.
Bubblers are designed for specific applications where other measurement techniques struggle.

View More
Share on