Latest News

July newsletter

AMS APPOINTED DISTRIBUTOR FOR TRIMEC

AMS Instrumentation & Calibration Pty Ltd has been appointed exclusive distributor for the TRIMEC range of flowmeters in NSW, Victoria, Tasmania, South Australia and Northern Territory. This is quite an achievement for AMS that only 10 years ago was a relatively small company and has now grown to represent some of the major flow companies in the world.
Trimec Industries specialises in the design and manufacture of a proprietary range of positive displacement rotary piston, oval gear, insertion and impeller flow meters, ancillary flow hardware and dedicated electronic flow instrumentation.
The meters measure the flow of clean liquids and are produced in a wide variety of materials and configurations to suit most markets including the food, chemical, cosmetic, ink, pharmaceutical, paint, petroleum and additive industries.
With the background of AMS in several other areas we intend to grow the market share in these markets as well with now being a “ONE STOP FLOW” supplier, being able to supply the most economical flow meter to full custody transfer flowmeters for both liquids and gases.

June Newsletter

AMS-IC, A ONE STOP FLOW SHOP

With the appointment of AMS as a distributor for GE Sensing ( Panametrics, General Eastern and Rheonik ) distributor and Trimec the future for AMS is looking extremely bright.

AMS is now able to offer the full range of flow instrumentation from a very economical positive displacement flow meter to a specialised custody transfer ultrasonic flowmeter and all possibilities in between.

Since the change of ownership the company in 1999 the company has been very selective in choosing its suppliers to best enable it to serve its customer base. This has resulted in now being able to offer the complete range of flow instrumentation as well as pressure, level and calibration equipment.

With offices in the major states and distributors elsewhere the company is able to offer a complete level of service to all industries. The addition of GE Sensing to our portfolio also means an increase in staff levels in the various states and at Head Office to ensure this level of service can be maintained.

The major companies that AMS represents in the flow area are: Aaliant/ Venture, Fluid Components International, HNL, Torbar, Emco, GE-Panametrics, GE-Rheonik, Trimec and Yamatake.

May Newsletter

April Newsletter

March Newsletter

February Newsletter

January Newsletter

December Newsletter

November Newsletter

October Newsletter

September / October Newsletter

AMS Instrumentation & Calibration Pty Ltd has been appointed distributor for the above divisions of GE Sensing throughout Australia. This is quite an achievement for AMS that only 10 years ago was a relatively small company and has now grown to represent some of the major flow companies in the world. Panametrics has been represented in Australia for quite a number of years and has a large installed base, particularly in the oil and gas fields. With the background of AMS in several other areas we intend to grow the market share in these markets as well. Following is an overview of the GE Sensing products:

Panametrics
Process industrial measurement is at the heart of our Panametrics brand instrument solutions for moisture, oxygen and hydrogen analysis as well as ultrasonic and vortex flow measurement.

Panametrics portable and fixed installation aluminium oxide hygrometers measure trace moisture in both gases and liquids. Panametrics gas analysers leverage many technologies: thermo-paramagnetic for percent oxygen analysis in gases; zirconium oxide for combustion flue gas oxygen analysis as well as analytical trace oxygen measurement in inert gases; electrochemical for trace or percent oxygen analysis in gases; and thermal conductivity for gas concentration measurement on binary mixtures with different thermal conductivities. Panametrics portable and fixed installation transit-time ultrasonic and fixed installation vortex based multivariable flowmeters can be applied to liquids, gases, and steam. Ultrasonic meters are available with either clamp-on or wetted transducers whereas vortex based meters are available with in-line or insertion type installation configuration.

General Eastern
General Eastern Instruments is known as a leader in the development, design, and manufacture of a full line of humidity, temperature and Pressure sensing instrumentation for Pharmaceutical, Building automation, Metrology, Automotive, Petrochemical and industrial applications.

The General Eastern product line is made up of Industrial relative Humidity (RH) dew point measurement devices, commercial relative humidity/ Temperature transmitters, sensors, and precision laboratory instrumentation as well as air and gas pressure transmitters and instruments, which are primarily used in HVAC systems and to monitor critical differential pressures in clean rooms, paint spray rooms, surgical suites, and respiratory treatment rooms.

Rheonik
Rheonik offers a variety of accurate, maintenance-free ultrasonic and vortex multivariable flowmeters and Coriolis Mass flowmeters that can take measurements reliably over a very wide range of pipe sizes and flow conditions. Accurate and versatile, our fixed-installation flowmeters provide an unrivalled combination of powerful features to meet your needs. For testing, service and troubleshooting, our portable flowmeters offer the ultimate in flexibility and ease of use. Our product range includes fixed-installation as well as ultrasonic portable flowmeters.

The Beamex® POC6 is an accurate and user-friendly automatic pressure output controller, providing regulated output from vacuum to 70 bar (1015 psi). The POC6 can be delivered as panel mounted to Beamex® MCS100 Workstation or as a portable desk top version. The POC6 can be used as a stand-alone pressure controller or as integrated to the Beamex calibration system.

Together with the Beamex® MC5 family and Beamex® CMX Calibration software, the POC6 offers a fully automated, integrated solution for performing, documenting and managing calibrations easily, efficiently and accurately.

The POC6 communicates with the Beamex® MC5P Calibration Host Module and with the portable Beamex® MC5 Multifunction Calibrator, enabling fully automatic calibration of pressure transmitters and other pressure instruments.

August newsletter

July Newsletter

June Newsletter

May newsletter

April newsletter